Step by Step Instructions
The following video provides instructions on how to update your alarms WiFi configuration.
Please note: The alarm will only connect to a 2.4GHz WiFi connection. 5GHz is not supported.
You can update your alarms Wi-Fi details by following the instructions below but you may find the video on this page more useful.
- On the main panel (with screen) press the D button and enter your code
- Press NO until you get to WIFI SETUP
- Press YES
- The screen will show Setup with Wi-Fi Device
- Press NO
- The screen will show SSID?
- Press YES
- Enter your SSID or Network Name
Important: This is case sensitive, to make a letter uppercase, press the A button. - Press YES
- SSID? will be displayed, press NO
- Password? will be displayed, press YES
- Enter your Wi-Fi password or Network Key
Important: This is case sensitive, to make a letter uppercase, press the A button. - Press YES
- Password? will be displayed, press NO
- The signal strength will then be displayed, this needs to be 11 or higher
- Press NO until the screen displays WIFI SETUP
- Press A