Set and unset the alarm
Pyronix Enforcer V10 and V11. Use the code or tag we gave you. The keypad keys are YES (tick), NO (cross), and A B C D.
Full set (leaving the house)
- Close windows and doors. If the keypad shows a flashing ALERT light, a door or detector is still open — see unable to set.
- Enter your user code, or present your tag to the reader symbol on the keypad.
- When it shows Set Areas?, press A (full set), then YES.
- The keypad says Please wait setting wireless, then an exit tone. Leave by the usual door and close it.
- Wait for the confirmation tone. Do not walk back in during the exit time.
Some systems use a final-door set (it finishes when that door closes) or a push-to-set button. Use the method we showed you on the day.
Unset (coming home)
- Come in through the entry door. The keypad starts an entry tone and a countdown.
- Go straight to the keypad and enter your code, or present your tag.
- The green unlocked padlock means it is unset. Do not wait for the entry time to run out — that will set the alarm off.
Staying in at night? Use part set. After an activation, see after an alarm. From a phone: ProControl+.